FRP Panels - Quick Overview:

1. Follow safety and fire guidelines during installation and use of FRP panels. Compliance with local building codes is recommended.
2. First FRP panel installed should be set true with plumb line. Check plumb line during installation.
3. Precondition FRP panels prior to installation and allow for expansion and contraction during installation.
4. Use moldings, silicone, fasteners and adhesive with FRP panels for best installation.
5. Remove excess silicone and adhesive during installation for quicker clean up.
6. Place moldings on FRP panels, if required, before fastening FRP panels.
7. Cut moldings as needed. Try to miter all applicable corners at a 45° angle.
8. Cut FRP panels, if required, for proper installation.
9. Clean FRP panels, if required, after installation.